October 31, 2015

Autumn Leaves Lamp Project

“We need a lamp over this coffee station,” my husband said back in 2003. Rather than run out to a home improvement store, I took it on as a DIY challenge.

I did a quick inventory of my crafts materials stash and decided I would use the fall leaves I had gathered from the Blue Ridge Parkway, North Carolina, the previous autumn season. Three types of big maple leaves will be excellent for the lamp design I had in mind.

This was the lighting solution I created back then, hung above our apartment’s coffee station. It served as a task light as well as a mood light for our nighttime activities.

Autumn Leaves Lamp over coffee station

Our apartment’s wall décor evolved over the years, but the lamp remained a fixture.

Autumn Leaves Lamp over coffee station

When we moved to our new home in 2007, the lamp became a nook light in the living room.

Autumn Leaves Lamp as a nook light

Autumn Leaves Lamp as a nook light

In 2009, we transferred it from the living room to the bedroom, where it became our nightlight until we moved overseas in early 2015.

Autumn Leaves Lamp as a nightlight

Because it would be impractical to ship the lamp halfway across the planet, and getting rid of the leaves was out of the question, I decided to dismantle the lamp and transport the three leaf panels.

Last week, at about the same time I picked up these fallen maple leaves 13 years ago, I built the lamp again. It hangs in its new location in our bedroom, to continue to serve as our nightlight for many more years.    

Autumn Leaves Lamp as a nightlight

Here’s a quick overview of how I made the leaf lamp:

Each pressed leaf is white-glued between plain white tissue paper and a transparent sheet protector. This sandwich is framed in cardboard, folded so that there’s a 2-inch tab to elevate the leaf panel from the base. Slip-in tabs attach the panels to the baseboard without adhesive.

Autumn Leaves Lamp leaf panels

Autumn Leaves Lamp

The baseboard is a sturdy recycled cardboard folded and taped to form a box-frame that’s hollow in the back. I cut slits on the baseboard to coincide with the slip-in tabs of the leaf panels.

Autumn Leaves Lamp baseboard

The first time around, I used crumpled gold gift wrap to cover the cardboard base. This time I painted the baseboard with a metallic bronze shade to jibe with the brownish leaves.

Autumn Leaves Lamp baseboard

The electrical elements are the basic wire, switch, plug, sockets, and lightbulbs. The lighting setup uses the traditional parallel wiring. The electrical is taped to the back of the box-frame, with each light sticking out through the cardboard base, centered behind each leaf.

Autumn Leaves Lamp electricals

Autumn Leaves Lamp lights

Autumn Leaves Lamp

These autumn leaves have been with us since the fall of 2002. And it looks like they will stay with us for much longer. That’s rather impressive.

  

October 18, 2015

TARDIS Bridesmaid Gown

Regina came to me a few months ago with a challenge. She will be a bridesmaid at a Dr. Who theme wedding and she needs help creating her attire: a deep-blue long gown with a white Victorian-inspired bolero. Essentially, she wanted to be a TARDIS incarnated as a bridesmaid. Challenge accepted.

She gave me this photo reference for the gown.

Bridesmaid gown reference photo.

The bride had given Regina the material for her dress; I would sew her gown from scratch. She wanted to look for the white blouse that I can just renovate into the bolero she imagines, so she went all around town until she found a long-sleeved ruffled piece.

Fabric and blouse.

Incorporating Regina’s ideas with the online images of Victorian boleros, I mocked-up this design for her approval.

Mock-up of bolero design.

With all elements agreed on, I went to work. Figuring out the bias skirt for her gown was a bit tricky because even after I did all the math, my pattern still came out wrong. Luckily, there was enough material to absorb the standard 10% error margin.

Same goes with the bolero. Good thing I had enough white voile in my fabric stash to cover for the wrap-around and wrist ruffles.

For this project, I had to fire up my serger machine for the ruffles and edge overlocks. It was an essential tool for the ruffling and the hemming of the spandex gown.

Cutting the bias skirt from pattern.

Ruffles. Ruffles. More ruffles.

Here’s the gown and bolero ready for the fitting. [Another vital tool in use here is the adjustable body form. I set it to Regina’s measurements. I won’t be able to complete these sewing projects without it. So yes, I need an adjustable male body form.]

Final fitting.

The biggest challenge for me was the pair of “window” patches on the bolero. Because I had given up my embroidery machine in a previous life, I had to figure out how to make it using either my regular sewing machine (the zigzag feature) or the serger (the rolled hem feature). I used up so much thread and practice cloth but finally succeeded in zigzagging the window panes and hand-sewing them onto the blouse.

TARDIS window panels for the bridesmaid gown.

To complete Regina’s TARDIS persona, I made these jewelry accessories for her: the pilot light earrings (come back for a blog post on how I did those), the "police box" bangle, and the door sign pendant necklace. She liked them.

TARDIS pilot light earrings.

TARDIS door sign pendant and POLICE BOX sign bracelet.

And here is our gorgeous bridesmaid at the church... 

Regina the TARDIS.

... and at the wedding reception (with her doppelganger). Achievement unlocked.

Regina, the TARDIS, with TARDIS, the gift.



Captain John Hart Costume Project


Oneal is back with another costuming project for me. He is attending a Dr. Who theme wedding and wants to go as Captain John Hart from the spinoff “Torchwood.”

I asked, “Who?”

He said, “Yes.”

I asked again, “Captain Who?”

He said, “No, Dr. Who. Captain John Hart.”

Before I could open my mouth again, he showed me the online photos of Captain John Hart. He said that’s the jacket he wants to wear to the wedding. 

Captain John Hart of Torchwood

Oneal said he will look for a jacket of the same color and texture and I can just convert it. Add the braid and buttons accessories, and adjust the collar and sleeves.

Easy as pie. If he can bring me the jacket (so I won’t have to make one from scratch), I’ll do the required renovations.

The search for the jacket took a few weekend trips to where jackets are sold. Remotely, he consulted with me on the options he found.


Oneal searching for the right jacket.

One had black sleeves, one looked like salmon, one looked like eggplant. We agreed on the maroon corduroy. I could make it work.

Next was the search for the braid material, or technically, the soutache. And the brass buttons. After total fails at several sewing stores, he landed at Carolina’s where they had these fancy options:
  
Searching for the right soutache.

Since it was going to be a wedding anyway, we agreed to use the white one with the silver trim (but without glitter or crystals). Here’s our messaging about the soutache and buttons.



He ended up buying a whole roll of the soutache (60+ feet) and the store's entire stash of gold buttons (a dozen more than we needed).

With all the materials available, I went to work. Digging through the sewing accessories I hauled from the US, I determined that the best way to work with the soutache is with a sticky stabilizer and fusing tape. Keeping an eye on the reference photo, I estimated the size and shape of the area the soutache will cover and cut a paper pattern.

Materials for the Captain John Hart chest braid.

This part required a lot of patience but the result was remarkable!

Making the Captain John Hart chest braid.

The next step was to sew the soutache onto the jacket. Two straight lines for now, just to hold the panel in place. Final stitching will be done after the fitting.

Sewing the soutache onto the jacket.

Oneal went searching again, this time for dark blue corduroy material that I will use for the sleeves and collar. But his search was a bust, so I said, “How about I use a blue microfiber that I have in my fabric stash? I will show you.”

This was the jacket Oneal tried for a final fitting. Just a few buttons, and pins all over the place.

Captain John Hart jacket in pins.

The jacket passed the fitting.

Captain John Hart jacket project Before-and-After.

Achievement unlocked!

Here’s Oneal at the wedding, with his wife wearing the project in my next blog entry.

Oneal at the Dr. Who theme wedding as Captain John Hart.